Web Content Display Web Content Display

Minimize

Quick Links

Last Updated: 02/28/2018
Click on the Icon
 Foreign Travel Insurance Program Enrollment 
 University Authorized Driver Enrollment
 Off Campus Activity Notification 

 
Ergonomic Evaluation Assessment Request
 Workplace EHS Assessment
 Report an Incident
 MSDS Online Look-up
 Emergency Response Guide
 Have a Suggestion
 CSU-SystemSkillport
 Cal Maritime EHS Training Library

 


Web Content Display Web Content Display

Minimize

EHS Training  Resource Hub

Last Updated: 03/04/2018

Overview

It is essential to provide training for employees concerning general safe work practices as well as specific instruction with respect to hazards unique to each employee's job assignment.The University Injury Illness Prevention Program is designed to identify the different hazards to which an employee may be exposed during the course of conducting their regular job duties and outlining different measures that can be implemented to either correct hazards or mitigate the risk of resulting in an accident or injury but also prevent reoccurrence.

Training

The Department of Safety and Risk Management (SRM) offers Injury Illness Prevention Program training in the form if Initial/Reassignment Training to all employees. This training can be done in one of two different ways.

  • Read the University Injury Illness Prevention Program (IIPP) and sign the Individual Training Certification Form to certify that you read and understood the material in the Injury Illness Prevention Program and Mandatory Safe Work Practices document; you had the opportunity to ask questions and agree to follow the requirements and responsibilities identified in those documents.
  • Take the interactive Injury Illness Prevention Program (IIPP) Web Based Training and print the certificate of completion.

Who Must be Trained?

All employees must be trained on the University Injury Illness Prevention Program. This training is generally done at the point of hiring during an employee's New Hire Orientation or shortly after beginning their job.

When is Training Required?

Injury Illness Prevention Program Training is referred to Initial/ Reassignment Training and is required in the following circumstances whenever they occur:

  • Initial: Taken initially when an employee begins work,
  • Reassignment: Taken when an employee is reassigned, changes jobs or the hazards to which they are exposed during their job changes (i.e. equipment changes, material changes etc.)
  • Updates: When Environmental Health and Safety makes changes to the University Injury Illness Prevention Program, employees must be trained on the changes and will be notified when that occurs

 

Refer to Cal/OSHA Safety & Health Training and Instruction Requirements as outlined in Appendix C of the Injury Illness Prevention Program.


Web Content Display Web Content Display

Minimize

Many standards promulgated by the Occupational Safety and Health Administration (OSHA) explicitly require the employer to train (or instruct, or communicate, or inform . . .) employees in the safety and health aspects of their jobs. Other OSHA standards make it the employer's responsibility to limit certain job assignments to employees who are "certified," "competent," or "qualified" - meaning that they have had special previous training, in or out of the workplace. Also, the term "designated" personnel means selected or assigned by the employer or the employer's representative as being qualified to perform specific duties

At Cal Maritime EHS Training is a two step process, whereby, the employee completes a regulatory compliant classroom session either through a vender or trhough the department of safety and risk management. Once the classroom session is complete the employee will then  complete the "Practical" portion which is Cal Maritime program and/or departmental specific.  

Course Description: Aerial Lift

Employees that use Extensible boom platforms, Aerial ladders, Articulating boom platforms, vertical towers, and any combination of such devices will be trained in securing and locking in place for travel, safety checks, body belts, boom and basket load limits and bursting safety factor. Employees must be trained prior to using said devices

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

Course Description: Asbestos

This course will provide you with information about the serious health hazards associated with exposure to asbestos. It will also address where asbestos is commonly found, how it can potentially affect you, and what you need to do to protect yourself and others from exposure. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives for this course are to list the two agencies that have been principally responsible for generating regulations for asbestos control, define terms associated with asbestos, identify where asbestos-containing materials are commonly found in building materials, list the requirements for signs and labels that identify asbestos exposure hazard areas, identify illnesses related to asbestos exposure, describe the medical surveillance program required by the California Occupational Safety and Health Administration (Cal/OSHA), recognize circumstances in which personnel may be exposed to asbestos, and identify safety measures that protect against asbestos exposure. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology.

Intended For: This course is designed for employees who may be exposed to asbestos at or above the permissible exposure levels, and employees who perform housekeeping or maintenance operations in areas that contain asbestos-containing materials and potential asbestos-containing materials

Length: 37 minutes

Skillport Library ID: ehs_cal_a01_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

Course Description: Back Safety & Material Handling

Back injuries account for one in every five job related injuries in California workplaces. This course is designed to give the participant injury prevention techniques, available lifting equipment, proper lifting techniques, and knowledge regarding lifting hazards specific to your workplace. Valid for the life of employment with the University

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Bloodborne Pathogen Cal/OSHA

This course will provide you with a basic understanding of bloodborne pathogens, common modes of transmission, methods of prevention, and what to do if an exposure occurs. Information presented will help minimize serious health risks to persons who may have personal exposure to blood and other potentially infectious materials in the workplace. The content in this course is designed to comply with the intent of the applicable regulatory requirements. The training requirements established under the Bloodborne Pathogen standard require an employer to allow for an opportunity for interactive questions and answers with the person conducting the training session. Employers may use a variety of methods to meet the intent of the standard. As an example, Cal/OSHA has previously stated that an employer can meet Cal/OSHA's requirement for trainees to have direct access to a qualified trainer by providing a telephone hotline. Learner objectives for this course are to identify bloodborne pathogens and symptoms of bloodborne diseases, identify modes of transition of bloodborne pathogens, recognize the proper use and handling of personal protective equipment, identify measures to be taken when the skin or eyes are exposed to infectious material, and specify the components of an Exposure Control Plan. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For: Anyone who performs job duties that could bring him or her into contact with blood or body fluids in the workplace including, but not limited to, health care workers, emergency medical and first aid responders, or persons cleaning health care areas, equipment, or devices

Length: 46 minutes

Skillport Library ID: ehs_cal_a03_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

Course Description:  Buidling Marshal/Emergency Coordinator

Designed specifically for Building Marshals and Monitors, this specialized training meets the requirements of the Chancellor's Office Executive Order 1013 by providing mandatory specialized training on an annual basis to those individuals who provide assistance during emergency disaster situations.

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

Course Description: Business Continuity Planning

An overview about business continuity, why it is important, and what it can do for you.  Per EO 1014, this workshop would serve as an "initial training" on BCP. It is open to all faculty and staff, and all individuals responsible for implementing BCPs.  Department faculty and staff may attend regardless if they have a plan or not.

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

Course Description: 

The training shall thoroughly cover safety and health hazards present on site, use of personal protective equipment, work practices by which the employee can minimize risks, and safe use of engineering controls and equipment. Employees who will operate chain saws during their employment will need this training prior to operating a chain saw

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Confined Space Cal/OSHA

This course covers information about confined spaces, hazardous atmospheres, necessary equipment, and permits. The intent of the course is to provide the learner with information about the hazards and hazard control methods that will permit safe work in enclosed work areas or confined spaces. Learner objectives for this course are to recognize terms commonly associated with confined spaces, distinguish the difference between permit required confined spaces and non-permit required confined spaces, identify hazards associated with confined spaces, recognize signs and symptoms of overexposure, identify equipment needed for confined space entry, specify safe entry procedures for confined spaces, recognize permits posted at points of entry to a confined space and specify their purpose and use, and identify the duties and responsibilities of personnel involved with confined spaces. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For: Employees who are assigned to work in and around work areas that have been identified as confined spaces

Length: 48 minutes

Skillport Library ID: ehs_cal_a10_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

Course Description: Compressed Gas

Many industrial and laboratory operations require the use of compressed gases for a variety of different operations. This course will establish the needed elements for an effective compressed gas safety program. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives for this course are to identify the specific hazards associated with compressed gases, identify hazards associated with handling acetylene, hydrogen, and oxygen gases, identify cylinder marking requirements, specify the special storage, use, and handling precautions necessary in order to control the hazards, and identify transportation requirements.

Intended For: All employees who work around and with compressed gas and compressed gas cylinders

Length: 30 minutes

Skillport Library ID: esh_sah_a55_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

Course Description: 

 

Intended For:

Length:

 

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

Course Description: Electrical Safety

The Electrical Safety course provides training in the minimum safety requirements and assists in the elimination of accidents which may result from the operation, installation, removal, use and maintenance of electrical equipment and tools. Employees responsible for the Electrical System on campus are required to attend.  Valid for the life of employment with the University.

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

Course Description: Emergency Preparedness

This course was designed and developed to provide instruction on emergency response, safety, reporting, and evacuation of company facilities and work areas in the event of a natural disaster, fire, bomb threat, or other emergency. The procedures contained in this training should be followed unless otherwise directed by your employer, police or fire department officials. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to discuss the purpose and scope of an emergency response plan, describe the purpose and scope of an emergency evacuation plan, recall the actions to take in specific emergency situations, describe the purpose and scope of a workplace violence prevention plan, and identify specific actions to take in the event of a bomb threat.
This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For: All employees

Length: 46 minutes

Skillport Library ID: ehs_cal_a15_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

Course Description: Ergonomics

This course is designed to provide the basic information needed to recognize and report musculoskeletal disorder (MSD) signs, symptoms, and risk factors. It addresses the key components of an ergonomics program and provides information to assist both employees and employers in minimizing the risk of developing work-related MSDs. This course applies to both office and industrial settings. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to define terms related to the study of ergonomics, recognize signs and symptoms associated with musculoskeletal disorders, identify risk factors associated with musculoskeletal disorders, and identify controls commonly used to reduce or eliminate musculoskeletal disorders in the workplace. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology.

Intended For: All persons who have work activities that involve physical efforts involving lifting and handling materials or objects or actions that involve repetitive motions or other procedures that may be related to MSDs, and employers who may be responsible for implementing an ergonomics program

Length: 33- minutes

Skillport Library ID: ehs_cal_a08_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Ergonomics Computer

This course is designed to provide the basic information needed to recognize and report musculoskeletal disorder (MSD) signs, symptoms, and risk factors. It addresses the key components of an Ergonomics Program and also provides information to assist both employees and employers in minimizing the risk of developing work-related MSDs. This course applies to employees and employers required to work in computer/data entry environments. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives for this course are to: define terms related to the study of ergonomics, recognize signs and symptoms of injury to the muscles and skeleton and the importance of early reporting, identify risk factors for injury to the muscles and skeleton, and specify controls and work practices to reduce and/or eliminate risk factors for injury to the muscles and skeleton

Intended For: All persons who work primarily with computers

Length: 35 minutes

Skillport Library ID: esh_sah_a63_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Ergonomics Office

This course is designed to provide the basic information needed to recognize and report musculoskeletal disorder (MSD) signs, symptoms, and risk factors. It addresses the key components of an ergonomics program and also provides information to assist both employees and employers in minimizing the risk of developing work-related MSDs. This course applies to employees and employers in office and administrative type settings. Learner objectives are to: define terms related to the study of ergonomics; recognize signs and symptoms of injury to the muscles and skeleton and the importance of early reporting; identify risk factors for injury to the muscles and skeleton; specify controls and work practices to reduce and/or eliminate risk factors for injury to the muscles and skeleton; specify how to report MSD signs, symptoms, and hazards in your job and how the employer is required to address them

Intended For: All persons who have work activities in an office setting; use computer workstations or participate in activities involving light lifting, repetitive motions or other procedures that may be related to MSDs; and employers who may be responsible for implementing an ergonomics program

Length: 30 minutes

Skillport Library ID: esh_sah_a64_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Office Ergonomics Cal/OSHA

This course is designed to raise awareness about hazards that may be encountered when working in office and administrative environments. The common hazards associated with work in offices are high noise levels, poor air quality, ergonomic hazards, and office accidents and injuries such as electric shock and falls. The content of this course is designed to comply with the applicable regulatory requirements. The learning objectives of the course are to identify office noise abatement and air quality and ventilation strategies; identify the signs and symptoms of ergonomic hazards; and identify how to prevent potential office hazards and common office injuries, such as back strain, slips, trips, falls, eyestrain, and electric shocks. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For:Personnel working in administrative and office areas

Length: 29 minutes

Skillport Library ID: ehs_cal_a04_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Eye Safety

Every year many individuals sustain work related eye injuries. Find out the risks to your eyes in the workplace; the types of protective eyewear to guard your eyes; and first aid procedures if you damage your eyes

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

Course Description: Fall Protection Cal/OSHA

This course is intended to provide employees who might be exposed to fall hazards with the ability to recognize such hazards and the ability to minimize them. The content in this course is designed to comply with the intent of the applicable regulatory requirements.
Learner objectives are to recognize common workplace fall hazards, describe fall protection techniques used in general industry, identify fall protection equipment and limitations, and describe the primary components of a Cal/OSHA-compliant fall protection program.
This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology.

Intended For: All personnel exposed to a potential free fall greater than 6 feet while on the job

Length: 35 minutes

Skillport Library ID: ehs_cal_a13_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

Course Description: Field Trip & Other Off Campus Activity Planning

This course teaches employees how to recognize and minimize those areas where falls may occur. The training will include fall protection systems, controlled access zones and guardrails, personal fall arrest, safety nets, warning lines and safety monitoring systems. Must be taken annually

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

 

Course Description: Fire Extinguisher

This course is designed to protect employees and help prevent serious property loss from workplace fires. It identifies the various classes of fires, types of portable fire extinguishers, and actions to take in the event of a fire. It describes when and how to use portable fire extinguishers to put out small fires. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives for this course are to discuss the regulatory background for portable fire extinguishers, classify types of fires, identify types of portable fire extinguishers and fire extinguishing agents, and describe the proper location and use of portable fire extinguishers

Intended For: Employees responsible for using portable fire extinguishers in the event of a fire

Length: 44 minutes

Skillport Library ID: esh_sah_a42_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: First Aid Medical Emergency

Medical emergencies can occur at any time but may be hidden because of injuries suffered in an accident, or an accident may trigger a medical emergency such as a heart attack, stroke, or seizure. This training will focus on the signs and symptoms of specific medical emergencies and their treatment. Being trained in first aid could mean the difference between life and death. Note: This training should not be used as the primary basis for any first aid certification. It is intended to provide the learner with knowledge-based training only. This training should be accompanied by a performance-based component provided by a certified first aid instructor. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to describe how to respond appropriately to a medical emergency, and recall the signs, symptoms, and first aid treatment of the following medical emergencies: choking, poisoning, heart attacks, respiratory distress, strokes, seizures, and diabetic shock. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

 

Intended For:  All employees

Length: 48 minutes

Skillport Library ID: esh_sah_a74_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

Course Description: First Aid: CPR

Emergencies requiring cardiopulmonary resuscitation (CPR) can and do occur without warning. It is important that you know the basic emergency techniques for recognizing and treating failures of the respiratory system and heart. This course will focus on the three procedures of basic life support: restoring circulation, maintaining an open airway, and restoring breathing. Note: this training should not be used as the primary basis for any CPR certification. It is intended to provide the learner with knowledge-based training only. This training should be accompanied by a performance-based component provided by a certified CPR instructor. The content in this course is designed to comply with the intent of the applicable regulatory requirements.
Learner objectives are to recall basic life support techniques used to restore and maintain a victim's circulation, recall basic life support techniques to open a victim's airway, and recall basic life support techniques used to restore and maintain breathing.
This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For: All personnel

Length: 21- minutes

Skillport Library ID: esh_sah_a73_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: First Aid: AED

The primary focus of this course is the proper use of the Automated External Defibrillator (AED). Use of the AED also includes the correct application of the ABC's of basic life support and basic CPR techniques, which will also be reviewed in this training.
Note: This training should not be used as the primary basis for any AED or CPR certification. It is intended to provide the learner with knowledge-based training only and should be accompanied with a performance-based component provided by a qualified instructor. The content in this course is designed to comply with the intent of the applicable regulatory requirements. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For: All personnel

Length: 30- minutes

Skillport Library ID: esh_sah_a72_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

Course Description: Flammable Liquids

This course is intended for employees who work in environments where flammable liquids are used and stored. It covers the OSHA and NFPA standards for safe handling of flammable liquids, as well as best practices for storing and working safely around flammable liquids.
This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For: Employees who handle or work with flammable or combustible materials

Length: 49 minutes

Skillport Library ID: ehs_hsf_a08_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Foot Safety

Your feet at work. This course will address foot pain, common problems, protective your feet at work, the right shoes for the job, choosing the best safety shoes. 

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

 

Course Description: Forklift Safety Awareness Cal/OSHA

The purpose of this training is to help you become a qualified forklift operator; one who has the skills and knowledge to operate a lift truck in a safe and proper manner. The content in this course is designed to comply with the intent of the applicable regulatory requirements.
Learner objectives are to recognize general engineering and capacity principles associated with forklift safety; identify factors that lead to forklifts tipping over; distinguish between safe and unsafe forklift operations; describe the differences between driving an automobile and a forklift; identify general loading and unloading principles associated with forklift safety; specify safe refueling and recharging procedures; and list the steps to perform in walk-around and sit-down inspections. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology.

 

Reminder: Forklifts are considered a University Vehicle and as such all operators will need to enroll in the University Vehicle Safe Operator Program and complete the Defensive Driver Training.


Intended For: Employees operating and servicing forklifts

Length: 36- minutes

Skillport Library ID: ehs_cal_a19_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: General Office Safety

Employees who use or may be exposed to potentially hazardous substances or harmful agents shall be informed about the hazards of those substances or physical agents and shall be trained in the precautions to take to prevent exposure and what to do if they are accidentally exposed. Valid for life of employment with the University

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description:  Globally Harmonized System of Classification and Labeling of Chemicals (GHS)

GHS, an acronym for Globally Harmonized System of Classification and Labeling of Chemicals, is a system aiming to standardize and harmonize the classification and labeling of chemicals. Although many countries follow regulatory systems for the safe handling and transport of chemicals through labels and safety data sheets, there is no standard approach. So while the formats are similar in different countries, the differences are significant enough to warrant different labeling and safety data sheets for the same product in different markets. With the gradual implementation of the GHS worldwide, countries have consistent and appropriate information on the chemicals they import or produce, and the infrastructure to control chemical exposures and protect people and the environment can be established in a comprehensive manner.
This course introduces the GHS and explains how hazards are classified and communicated through the use of labels and safety data sheets

Intended For: All employees

Length: 30 minutes

Skillport Library ID: esh_sah_a56_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Hazard Communication Cal/OSHA

This course will acquaint you with the precautions that both you and your employer must take in order to safely use, handle, and dispose of hazardous chemicals in the workplace. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to identify the routes of chemical entry into the body, define various categories of chemical hazards, interpret warning labels, interpret information commonly found in a Safety Data Sheet (SDS), and identify types of controls commonly used to reduce or eliminate contact with hazardous materials in the workplace. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology.

Intended For: Employees and employers who work with hazardous chemicals

Length: 45 minutes

Skillport Library ID: ID: ehs_cal_a06_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Hazardous Materials in the Workplace

This course discusses proper handling of chemicals in the workplace and actions that can be taken to protect the workers, the public, and the environment. It also covers the roles and responsibilities of those responding to events involving hazardous materials. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to define hazardous materials, identify the factors that influence how spills are controlled; recognize where spills are likely to occur; identify possible responses to a release; specify potential outcomes of using inappropriate control methods; define the primary and secondary goals of spill control; define the terms containment and confinement; specify the recommended procedures for spill and leak response; specify the proper steps to contain hazardous spills; specify confinement methods for solids, liquids, and gases; and define the roles and responsibilities of personnel who respond to emergencies involving hazardous materials. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology.

Intended For: Regular hazardous waste site workers and managers

Length: 60 minutes

Skillport Library ID: esh_sah_a36_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Hazardous  Materials Handling & Storage

This course covers information about drum handling, compressed gas cylinders, flammable materials, slings, safe lifting techniques, and safe handling procedures. The intent of the information is to familiarize the learner with safe work practices necessary to prevent injury while handling materials and equipment in the workplace. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to: identify safe lifting techniques when manually handling an object; identify hazards associated with handling drums and containers; specify the proper handling, transportation, storage, and use of compressed gas cylinders; identify hazards associated with handling acetylene, oxygen, or hydrogen; specify how to detect leaks; recognize materials that may be flammable and/or combustible; identify the factors involved in the proper selection, use, and inspection of slings used to hold suspended loads; and identify safe handling and moving practices when performing routine maintenance. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology.

Intended For: Persons who will be moving or handling objects in and around the workplace

Length: 60 minutes

Skillport Library ID:esh_sah_a20_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Hazardous Material Spill

Employees who responsible for the cleanup of hazardous materials upon accidental spills or releases will be trained regarding safety and health hazards associated with material spills; the mitigation process for cleanup, how to report spills, and who will respond to spills. Valid for life of employment with the University

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Hazardous Waste

For employees that are responsible for the management of hazardous materials, and may have contact with or be exposed to hazardous substances, health hazards or safety hazards in relation to hazardous waste. The training shall thoroughly cover safety and health hazards present on site, use of personal protective equipment, work practices by which the employee can minimize risks, safe use of engineering controls and equipment, and the medical surveillance requirements. Must be repeated annually

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Hearing Conservation

This training course will provide information to help you prevent noise-induced hearing loss. It will also explain the purpose and components of a hearing conservation program including the proper fitting, use, and care of hearing protectors. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to describe the effects of noise on hearing; discuss the components of Cal/OSHA's Hearing Conservation Program – noise monitoring, hearing tests, training, and hearing protection; and specify the proper selection, fitting, use, and care of hearing protectors. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For: All personnel subject to the hearing conservation program

Length: 32 minutes

Skillport Library ID: ehs_cal_a05_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Heat Illness Prevention for Supervisors Cal/OSHA

Heat-related illnesses can be life threatening, so it's crucial for supervisors to take the proper preventative actions and intervene appropriately to maximize workplace safety. This course equips supervisors to recognize the risk factors, signs, and symptoms of heat-related illnesses, and presents first aid guidelines for treating these illnesses. The course also explores supervisors' responsibilities for preventing and responding to heat-related illnesses, and outlines workplace high heat requirements. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology. Please note, the course materials and content were current with the laws and regulations at the time of the last expert review, however, they may not reflect the most current legal developments. Nothing herein, or in the course materials, shall be construed as professional advice as to any particular situation with respect to compliance with legal statutes or requirements.

Intended For: All supervisors of personnel that may be required to work in hot environments

Length: 21 minutes

Skillport Library ID: ehs_cal_a22_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Heat Illness Prevention

Each year more people in the United States die from extreme heat than from hurricanes, lightning, tornados, floods, and earthquakes combined. This course will discuss the effects of heat on your body, outline the risk factors for heat-related illnesses, and describe the associated treatments for each. This training will also explain several control measure techniques and safe work practices that you can use to prevent heat-related stresses. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to describe how your body handles heat and what personal factors may lead to heat stress; identify the signs, symptoms, and first aid treatments of heat-related illnesses; and recall preventive measures that you can take to minimize heat stress. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology.

Intended For: All personnel that may be required to work in hot environments

Length: 25 minutes

Skillport Library ID: ehs_cal_a07_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Hot Work- Welding

Anyone who welds or does Hot Work must have training in the General Industry Safety Orders and National Fire Prevention Association's fire prevention and suppression procedures for Hot Work and Welding.  Valid for the life of employment with the University.

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description:  Injury Illness Prevention Training

Since July 1991 when Cal/OSHA mandated the IIPP regulation, California employers have seen a significant drop in the number of workplace injuries and deaths. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For: All supervisors and managers who have responsibility for the safety and health of employees

Length: 30 minutes

Skillport Library ID: ehs_cal_a09_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: ICS 100

ICS 100.HE, Introduction to the Incident Command System for Higher Education, introduces the Incident Command System (ICS) and provides the foundation for higher level ICS training. This course describes the history, features and principles, and organizational structure of ICS. It also explains the relationship between ICS and the National Incident Management System (NIMS). This course uses the same objectives and content as other ICS courses with higher education examples and exercises.

This course must be completed by all employees within the first year of hire

http://training.fema.gov/EMIWeb/IS/IS100HE.asp

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: ICS 200

ICS 200 is designed to enable personnel to operate efficiently during an incident or event within the Incident Command System (ICS). ICS-200 provides training on and resources for personnel who are likely to assume a supervisory position within the ICS.

http://training.fema.gov/EMIWeb/IS/IS200A.asp

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: ICS 702 IS-702 National Incident Management Systems (NIMS) Public Information Systems

The National Incident Management System (NIMS) provides a consistent nationwide template to enable all government, private-sector, and nongovernmental organizations to work together during domestic incidents. This includes public information.The public information systems described in NIMS are designed to effectively manage public information at an incident, regardless of the size and complexity of the situation or the number of entities involved in the response.This course is designed for local and State public information officers and takes approximately three hours to complete

http://training.fema.gov/EMIWeb/IS/is702.asp

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: IS-775, EOC Management & Operations

This course describes the role, design, and functions of Emergency Operations Centers and their relationships as components of a multi-agency coordination system. The course contains disaster-related examples, activities and case studies that relate to EOC's and multi-agency coordination systems at the local, state and federal levels of government

Course Access: http://training.fema.gov/EMIWeb/IS/IS775.asp

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: IS-800.b National Response Framework, An Introduction

The course introduces participants to the concepts and principles of the National Response Framework

http://training.fema.gov/EMIWeb/IS/IS800b.asp

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: IS-906 Workplace Security Awareness

This course provides guidance to individuals and organizations on how to improve the security in your workplace. No workplace—be it an office building, construction site, factory floor, or retail store—is immune from security threats.

Employees are often the target of these threats as well as the organization's first line of defense against them. Threats endanger the confidentiality, integrity, and security of your workplace, as well as your virtual workplace and computer systems. This course presents information on how employees can contribute to your organization's security.

The online course is free and will take approximately one hour to complete.

http://training.fema.gov/EMIWeb/IS/IS906.asp

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: IS-907 Active Shooter: What You Can Do

An active shooter is an individual actively engaged in killing or attempting to kill people in a confined and other populated area. In most cases, active shooters use firearms and there is no pattern or method to their selection of victims. Active shooter situations are unpredictable and evolve quickly.

All employees can help prevent and prepare for potential active shooter situations. This course provides guidance to individuals, including managers and employees, so that they can prepare to respond to an active shooter situation.

This course is not written for law enforcement officers, but for non-law enforcement employees.  The material may provide law enforcement officers information on recommended actions for non-law enforcement employees to take should they be confronted with an active shooter situation.

The online course is free and will take approximately 45 minutes to complete

http://training.fema.gov/EMIWeb/IS/IS907.asp


Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Lab Safety

This overview course is designed for employees who work in an industrial, clinical, or academic laboratory setting. It will serve to educate the laboratory employee to diverse safety and health concerns related to their job. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives include the following: identify general requirements of the Laboratory Safety Standard, recognize the importance of a Chemical Hygiene Plan in your workplace, define the purpose of a Safety Data Sheet, describe safety guidelines specific to laboratory fire and burn hazards, and identify general emergency guidelines to be followed in the laboratory. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For: All personnel working with hazardous chemicals in a laboratory setting

Length: 22 minutes

Skillport Library ID: ehs_cal_a20_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Lockout/Tagout (LOTO) Cal/OSHA

This course provides information about control of hazardous energy and work under the protection of a lockout/tagout permit. The intent of the course is to provide information on lockout/tagout practices and the significance of lockout/tagout devices. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to define terms commonly used in a lockout/tagout program, describe specific lockout/tagout techniques commonly used in a lockout/tagout program, and recall standard lockout/tagout procedures.
This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For: All persons whose jobs will require the operation or use of a machine or equipment on which servicing or maintenance is to be performed, or whose duties will require that person to work in an area in which such service or maintenance is being performed

Length: 22- minutes

Skillport Library ID: ehs_cal_a17_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Lockout/Tagout (LOTO) Authorized Person

This course provides information about control of hazardous energy and work under the protection of a Lockout/Tagout permit. The intent of the course is to provide information on lockout and tagout practices and the significance of lockout and tagout devices.

Intended For: Managers, supervisors, and employees

Length: 69- minutes

Skillport Library ID: esh_sah_a08_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: 

 

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: PPE-Body

This course will help acquaint you with the various types of personal protective equipment (PPE) specifically designed to protect your torso, arms, and legs. It will assist you in selecting and maintaining the proper equipment based on the workplace hazards present. The content in this course is designed to comply with the intent of the applicable regulatory requirements - recall general OSHA requirements related to personal protective equipment, choose the appropriate body protection to guard against workplace hazards, and describe how to inspect and maintain body protection. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For:This course is recommended for all employees and supervisors who are required to wear PPE by OSHA regulations

Length: 30 minutes

Skillport Library ID: esh_sah_a66_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Personal Protective Equipment

This course covers types, selection, maintenance, and care of personal protective equipment in the workplace. The types of personal protective equipment (PPE) covered in the course include: hard hat, respiratory protection, hearing protection, and body protection. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to: describe the proper use of the various types of PPE commonly found in general industry, identify the level of protection that a user is provided when wearing specific types of PPE, and discuss the general maintenance and care techniques used for various types of PPE. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For: All persons who will be in work areas where specific job-related hazards (flying/falling objects, hazardous materials, high noise levels, respiratory hazards, exposure to temperature extremes, potential exposure to energy sources, fall potentials, etc.) have been identified

Length: 63 minutes

Skillport Library ID: ehs_cal_a18_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: PPE-Body

This course will help acquaint you with the various types of personal protective equipment (PPE) specifically designed to protect your torso, arms, and legs. It will assist you in selecting and maintaining the proper equipment based on the workplace hazards present. The content in this course is designed to comply with the intent of the applicable regulatory requirements - recall general OSHA requirements related to personal protective equipment, choose the appropriate body protection to guard against workplace hazards, and describe how to inspect and maintain body protection. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For:This course is recommended for all employees and supervisors who are required to wear PPE by OSHA regulations

Length: 30 minutes

Skillport Library ID: esh_sah_a66_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: PPE-Foot & Leg

This course will help acquaint you with the various types of personal protective equipment (PPE) specifically designed to protect your feet and legs. It will assist you in selecting and maintaining the proper equipment based on the workplace hazards present. The content in this course is designed to comply with the intent of the applicable regulatory requirements – recall general OSHA requirements related to personal protective equipment, choose the appropriate foot and leg protection to guard against workplace hazards, and describe how to inspect and maintain foot and leg protection

Intended For:This course is recommended for anyone who is required to wear foot and leg protection or supervises those who do

Length: 30 minutes

Skillport Library ID: esh_sah_a67_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: PPE-Eye & Face

This course will help acquaint you with the various types of personal protective equipment (PPE) specifically designed to protect your eyes and face. It will assist you in selecting and maintaining the proper equipment based on the workplace hazards present. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to: recall general OSHA requirements related to personal protective equipment, choose the appropriate eye and face protection to guard against workplace hazards, and describe how to inspect and maintain eye and face protection.
This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For:All personnel exposed to potential workplace eye injuries

Length: 30 minutes

Skillport Library ID: esh_sah_a68_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: PPE-Hand

Personal protective equipment (PPE) is designed to protect you from serious workplace injuries or illnesses resulting from contact with chemical, radiological, physical, electrical, mechanical, or other workplace hazards. This 30-minute course will help acquaint you with the various types of PPE specifically designed to protect your hands. It will assist you in selecting and maintaining the proper equipment based on the workplace hazards present. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to describe OSHA requirements related to personal protective equipment, choose the appropriate hand protection to guard against specific workplace hazards, and recall general hand protection usage and maintenance guidelines.

Intended For:All personnel exposed to potential workplace hand and arm injuries

Length: 30 minutes

Skillport Library ID: esh_sah_a70_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

Course Description: PPE-Head

This course will help acquaint you with the various types of PPE specifically designed to protect your head. It will assist you in selecting and maintaining the proper equipment based on the workplace hazards present. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to recall general OSHA requirements, choose the appropriate head protection to guard against workplace hazards, and describe how to inspect and maintain head protection

Intended For:This course is intended for all persons working in areas with overhead hazards

Length: 30 minutes

Skillport Library ID: esh_sah_a69_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Respiratory Protection

This course covers information relating to respiratory hazards, protection mechanisms, and safe work practices. It also includes information on how to use respiratory protection for protection from hazardous airborne contaminants in the work environment. This course does not include the types of respirators and other protective considerations required when working with ionizing radiation. Learner objectives are to recognize why respiratory protection is necessary; distinguish between employee and employer responsibilities for respiratory protection; identify the nature, extent, and effects of respiratory hazards to which you may be exposed; specify the operation, limitations, and capabilities of respirators; identify respirator selection procedures and practices; specify proper respirator use and inspection practices; recognize proper respirator maintenance, cleaning, and storage practices; and identify respirator malfunction and follow-up procedures. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For: Persons who will be potentially exposed to hazardous airborne contaminants in the course of their work

Length: 48 minutes

Skillport Library ID: ehs_cal_a21_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Safety Data Sheets

This course is designed to provide both workers and supervisors with a better understanding of how to interpret a safety data sheet (SDS), as well as address specific requirements associated with SDSs in the workplace. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to recognize the physical states in which chemicals are commonly found, identify chemical routes of entry into the body, identify the purpose of an SDS and describe the most common information found on a typical SDS, define common abbreviations used on an SDS, locate and interpret specific information found on an SDS, and specify control measures to prevent worker exposures to hazardous chemicals. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For: Anyone who must use chemical agents on the job

Length: 60- minutes

Skillport Library ID: esh_sah_a77_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Scaffold & Ladder Safety

This course is designed to train employees to recognize the hazards associated with ladders, stairways, and the type of scaffold being used at the work site and to understand the procedures to control or minimize those hazards. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to identify the types of portable ladders and their use, capacities, and safety considerations, describe the specific use, capacities, and safety features of fixed ladders, specify proper guidelines for ladder maintenance, and identify general scaffold requirements and safety considerations. This course was reviewed and updated for the November 2016 OSHA final rule updating walking-working surfaces standards and personal fall protection systems requirements

Intended For: Employees who use ladders or scaffolding during work tasks

Length: 41- minutes

Skillport Library ID: esh_sah_a32_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Slips, trips and falls

Slips, trips, and falls constitute the majority of general industry accidents. This course is intended to provide employees with the ability to recognize and prevent slip, trip, and fall hazards, and to address the key components of ladder safety. The content in this course is designed to comply with the intent of the applicable regulatory requirements. The learning objectives of the course are to list injuries that can result from slips, trips, and falls; identify fall hazards in the work area; describe the proper use of a ladder; specify how to set up a ladder; list tips to prevent injuries on stairs; describe how to minimize walkway hazards; and list contributing factors to slips, trips, and falls. This course was developed with subject matter support provided by EnSafe Inc., a global professional services company focusing on engineering, environment, health and safety, and information technology

Intended For: All personnel exposed to potential slip, trip, and fall hazards while on the job, and who will potentially use or be around ladders during the course of a routine or nonroutine work day

Length: 18- minutes

Skillport Library ID: ehs_cal_a11_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: Welding Cutting & Brazing

Welding, cutting, and brazing are hazardous activities that pose a unique combination of both safety and health risks to more than 500,000 workers in a wide variety of industries. The risk from fatal injuries alone is more than four deaths per thousand workers over a working lifetime. This course will inform learners of potential health and safety concerns unique to welding, cutting, and brazing. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to: specify fire prevention techniques used during welding, cutting, and brazing; specify the proper handling, transportation, use, and storage of compressed gas cylinders; specify proper operating procedures to ensure a safe means of welding and cutting; identify potential health concerns associated with welding, cutting, and brazing; define the importance of using proper Personal Protective Equipment (PPE); and identify safety concerns while welding, cutting, and brazing in confined spaces

Intended For: Employees involved in welding operations in the workplace

Length: 29- minutes

Skillport Library ID: esh_sah_a61_sh_enus

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: 

 

 

Intended For:

Length:

 

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

Course Description: 

 

 

Intended For:

Length:

Part A Part B

Register for Course

Submit Certificate

Register for Practical with SRM

 

The California State Department of Industrial Relations, Division of Occupational Safety & Health, CCR Title 8 Regulations references the following recommendations regarding personal protective equipment.

 

 


Web Content Display Web Content Display

Minimize

U-CAN

Hazard Awareness Recognition Program

Submit a Safety Report
Last Updated: 09/17/2018

U-Corrective Action Notification. Accident prevention through proactive action, recognition and communication.

Report of Safe Work Practices: Demonstrates the unconditional dedication toward the protection of person and property.
Report of Safety Concerns:You are encouraged to report any and all unsafe conditions that you observe on campus by using this form. You may make your report anonymously or you can contact the Department of Safety and Risk Management directly at 707-654-1076. The Report of Safety Concerns include but are not limited to; health and safety risks (such as trip and fall hazards or unsafe conduct by employees or students), 

 


Web Content Display Web Content Display

Minimize

Regulatory Resource

Last Updated: 03/09/2018

 


Web Content Display Web Content Display

Minimize

Recommended Training Service Providers 

Last Updated: 03/09/2018

 

 


Scroll Up
Staging Enabled